4
7.3 Mounting with double-sided tape
Mount the light using double-sided tape.
1. Remove the protective backing from the tape.
2. Stick the tape onto the mounting plate.
3. Remove the second backing and stick the mounting plate onto the mounting surface.
4. Hang the light on the mounting plate.
8 Operation
Operate the lights in manual or automatic mode. In manual mode you switch the lights on and off manu-
ally. In automatic mode, the lights are switched on by motion detection and switched off by the built-in
timer.
Note:
Replace the batteries as soon as you notice poor performance.
8.1 Operating in manual mode
Use the switch
ON/OFF/AUTO
to switch the light on and off.
1. To switch the lights on, move the switch
ON/OFF/AUTO
to
ON
.
2. To switch the lights off, move the switch
ON/OFF/AUTO
to
OFF
.
8.2 Operating in automatic mode
In automatic mode, lights on the same channel frequency communicate with each other. If a light with mo-
tion sensor detects movement, it tells the other lights to switch on as well.
1. On all lights, move the switch
CHANNEL
to the same channel number.
2. On all lights, move the switch
ON/OFF/AUTO
to
AUTO
.
à
When motion is detected, the lights switch on.
After 60 seconds, all lights go out if no further motion is detected.
9 Cleaning and care
Important:
Replace the batteries at least once a year to prevent leaking.
Clean the product with a dry, fibre-free cloth.
NOTICE! Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
10 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and dispose of them separately from the
product. You as the end user are required by law (Battery Ordinance) to return all used (re-
chargeable) batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labeled with this symbol to indicate that disposal
in the domestic waste is forbidden. The designations for the heavy metals involved are: Cd =
Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash
icon on the left).
You thus fulfill your statutory obligations and contribute to the protection of the environment.
11 Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product con-
forms to the 2014/53/EU directive.
■
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/
downloads
Enter the product item number in the search box. You can then download the EU declaration of conform-
ity in the available languages.
12 Technical data
Battery power supply ............................
4.5 V; 3 x 1.5 V, type AAA battery
Battery life (approx.) .............................
8 h
Protection class ....................................
Class III
Colour temperature ...............................
3000 K
Luminous flux .......................................
50 lm
Light colour ...........................................
Warm white
PIR sensor activation ............................
25 lux
PIR sensor detection angle ..................
110 °
PIR sensor detection range ..................
3 - 5 m
PIR sensor installation height ...............
<1.5 m
Timer ....................................................
60 s
Wireless frequency ...............................
2.402 - 2.480 GHz
Wireless range ......................................
6 m
Wireless transmission power ................
2.0 dBm
Operating temperature .........................
-20 to +45 °C
Operating humidity ...............................
20 - 80 % RH
Storage temperature .............................
-20 to +50 °C
Storage humidity ...................................
20 - 80 % RH
Dimensions (W x H x D) (approx.) ........
70 x 91 x 50 mm
Weight (approx.) ...................................
80 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2377686_V1_0821_jh_mh_en