I
NSTALLATION
The D/A-1 should be mounted horizontally on a flat hard surface.
Vertical installation is not recommended.
To minimize hum pickup, keep the unit well away from the power
amplifier, and route power cords away from input cables.
The D/A-1 requires an ac power line providing between 108 and 125
volts at 50 to 60 Hz. Alternatively, the D/A-1 is optionally available for
operation on 100, 220, or 240 volt power lines.
CONNECTION
The D/A-1 provides three separate digital inputs (two coaxial, and one
optical) and a coaxial digital output. Connect your digital sources (CD
transport, Laser Disc Player, DCC recorder) to any of these inputs, and
a DCC or other digital tape recorder to the digital output.
Digital Inputs
Coaxial 1:
Transformer coupled coaxial input with BNC connector
Coaxial 2:
Direct coupled coaxial input with phono connector
Optical:
TOSLINK optical connector. The TOSLINK connector is sup-
plied with a plug to prevent dust from accumlating on the lens of the
receiver. Leave this plug in place whenever this input is unused.
The D/A-1 is optionally available with an additional ST glass optical
connector. This option includes a back panel mounted toggle switch to
select between the two optical connectors.
Outputs
Digital Output:
A BNC connector is provided to send the digital signal
out to another digital device (normally a DCC recorder).
DA1 Owner’s Manual
4
