Attention!
The maximum voltage of 35 VDC in the circuit must not be
exceeded during DC current measurement. The measuring input
for current/voltage is not fused.
4.3.4 Wirina for a fixed
a) Wiring
If the panel meter is used for DC voltage or DC current measure-
ment in power supplies, distribution panels etc. where only one
range is necessary, a simple voltage divider for DC voltage mea-
surement or a simple shunt for DC current measurement is
sufficient.
When the DC voltage range or the DC current range to be mea-
sured is known, the panel meter is wired respectively. Observe
also the following figures and tables.
The series resistors of the
voltage divider are as follows:
Range
Dividor Resistance
Resistance Value
R I
R2
10
1
20
R I
10
100
200
10
10
13
