16
10. FS20 address system basics
The FS20 wireless control system (to which the ‘FS20S4’ 2-/4-channel
hand-held transmitter belongs) works with its own ‘house code’.
This means that your neighbour can also use the same
wireless control system and the two systems will not interfere
with each other (provided that the house code has been
programmed differently).
256 different addresses can be set within a house code. These addresses
are divided into 4 address types (available number is in brackets):
• Single addresses (225)
• Function group addresses (15)
• Local master addresses (15)
• Global master address (1)
One address from each address type can be assigned to each receiver.
This means that each receiver can respond to up to 4 different addresses,
but only ever to one address per address type.
If you need a receiver to respond to more than one transmitter, you can
program the transmitters to the same address or, if different transmitter
address types have been set, you can program the receiver consecutively
to these different addresses.
The individual address types have the following function:
• Single addresses
Each receiver should be set to a single address so that it can be
controlled separately.
