25
Cleaning and disposal
Clean the outer sensors regularly to avoid malfunctioning. Clean the display with a clean, damp and lint-
free cloth without abrasive of chemical cleaners.
Electronic products are raw material and do not belong in the household waste. When
the device has reached the end of its service life, dispose of it in accordance with the
current statutory regulations at the communal collection points. Disposal in the dome-
stic waste is not permitted.
Troubleshooting
In purchasing this parking aid, you have acquired a product which has been designed with state-of-the-
art technology and is operationally reliable.
Nevertheless, problems or faults may occur.
For this reason, the following is a description of how you can eliminate possible malfunctions yourself.
Please always observe the safety instructions!
Error
Possible cause
Solution
Parking aid
No ignition voltage available.
Switch the ignition on.
does not turn on.
The reverse gear is not engaged. Engage the reverse gear.
Wrong cabling.
Check the plug connec-
The fuse is defect.
tions and the flat fuse
of the voltage supply.
The display shows wrong
„Program error“
Turn the ignition off and
distance values and a
start the vehicle again (reset).
signal sounds although
The sensors are dirty.
Clean the sensors regularly.
there is sufficient space.
Repairs other than those described should only be carried out by an
authorised specialist.
Summary of Contents for 85 59 17
Page 52: ...51...