21
• Press and hold the control button for 2 seconds, the LED goes out, then
release the control button; the ‘FS20 FMS’ is now in seconds entry
mode.
• Press the control button as many times as necessary until the desired
number of seconds has been entered, for instance, press 8x for 9
seconds (LED blinks in intervals, 9x each).
If ‘0 seconds is chosen, the LED does not blink.
From any single second entry mode you can end and save the
settings.
To do this press and hold the control button for 2 seconds, the
LED goes out. Release the control button.
The timer setting has been saved, the ‘FS20 FMS’ is in normal
operating mode.
Summary of Contents for 623020
Page 1: ...Version 12 06 OPERATING INSTRUCTIONS Load monitor FS20 FMS Item no 62 30 20 ...
Page 35: ...34 ...
Page 36: ...35 ...