manualshive.com logo in svg

Conrad Electronic 623020, Operating Instructions Manual

Share
Download
Conrad Electronic 623020 Operating Instructions Manual Download Page 19

18

Y

Power-on command

This function means that when the ‘FS20 FMS’ is triggered, a power-
on command will be transmitted:

f

LED blinks in intervals, 1x each, briefly press the control button 1x,
LED blinks in intervals, 2x each

f

Press and hold the control button for 2 seconds, LED goes out,
release the button

f

Setting has been saved, the ‘FS20 FMS’ is in normal operating
mode

Z

Power-off command

This function means that when the ‘FS20 FMS’ is triggered, a power-
off command will be transmitted:

f

LED blinks in intervals, 1x each, briefly press the control button 2x,
LED blinks in intervals, 3x each

f

Press and hold the control button for 2 seconds, LED goes out,
release the button

f

Setting has been saved, the ‘FS20 FMS’ is in normal operating
mode

[

Timer function, then power-on command

This command means that when the ‘FS20 FMS’ is triggered, the
power-on command is 

only

 sent to the slave device 

after 

the pro-

grammed timer duration expires:

f

LED blinks in intervals, 1x each, briefly press the control button 3x,
LED blinks in intervals, 4x each

f

Press and hold the control button for 2 seconds, the LED goes out,
then release the control button; the ‘FS20 FMS’ is now in ‘

timer

mode

’.

Set the desired timer duration (point ‘4. Setting the timer
duration’ on the next page, also see the flowchart).

Summary of Contents for 623020






































Reviews:

No comments

Brands by name

Popular brands

Load more brands