17
Original Working Instructions
Usage Instructions
Assembly Instructions for Optional Kerb Brush
1. Bolt on the Kerb Brush Pin Bracket (ZZ220054) to the Powerbrush, using 4
M12 x 50mm bolts, provided.
2. Slide the gulley brush arm onto the pin.
3. Insert the linch pin to secure the arm to the bracket.
4. Pass the chain through the anchor point to a position where the bristle of the
kerb brush is just off the floor.
5. Use the turn buckle for fine adjustment to a point where the front bristles are
just touching the floor with a small amount of deflection.
