5
OPERATING INSTRUCTIONS
GETTING STARTED
Connect the Power Cord to the Power Input slot located on the back of the
Projector, and then plug the other end of the cord into a plug outlet. The LED
Indicator will light up red when power is connected to projector.
SWITCHING ON / OFF
To switch on the Falcon 2 Projector, press the power button on the Remote or slide
open the front cover on the projector. The Projector will play a boot sequence on
its screen. To switch off the Falcon 2, press the power button on the remote or
slide close the front cover on the projector.
STANDALONE STREAMING
The Projector can be used as a standalone device to share content from a variety
of devices with a wired connection or from a USB flash drive.
KEYSTONE CORRECTION / LENS FOCUS
Use the Keystone Correction Turn Dial to adjust the angle of the Projector. Use the
Lens Focus Turn Dial to adjust image focus to make picture clear.
MULTIMEDIA CONNECTION
To connect to the USB drive select the source “Multimedia” or press the USB
Button on the remote. Then navigate to the file type that you want (movie, photo,
music or text) using the directional keys. Select the file you would like
to view by pressing the Play / Pause button or the OK button on the remote
or the OK button on the projector.
AV VIDEO CONNECTION
Connect the 3-in-1 Cable (included) to the Video Input on the back of the
projector. Navigate to the AV Media Source and press either the OK Button on the
Remote Control or the OK Button on the Projector.
HDMI CONNECTION
Connect an HDMI cable to the HDMI Input on the back of the projector. Navigate
to the HDMI media source and press either the OK Button on the Remote Control
or the OK Button on the Projector.
Note:
The projector is now in standby mode.
