![Connex CP102 Instruction Manual Download Page 10](http://html1.mh-extra.com/html/connex/cp102/cp102_instruction-manual_2653293010.webp)
10
NOTE:
The USB debugging mode must be turned on when using this function.
Please wait patiently for the wired connection program to update.
Supports Android 5.0 or above.
• Never use your projector near water or in areas where it can come into contact
with water. Never handle the projector if it was dropped in water or any other
liquid. If the product comes into contact with water while switched off, but still
plugged in it is a safety hazard.
• Always make sure your hands are dry before touching the plug or power
connections.
• Do not operate the product with a damaged cord or plug, or after it
malfunctions, has been dropped, or damaged in any manner.
• The Falcon 2 is intended for personal use only. Commercial use invalidates the
warranty and the supplier cannot be held responsible for injury or damage
caused when using the device for any other purpose than that which it was
intended for.
• This projector is not intended for use by children, or persons with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
device by a person responsible for their safety. Extreme caution must
be exercised.
• Children should be supervised to ensure that they do not play with the Projector.
Packaging must never be left within reach of children, as it is potentially
dangerous.
• Do not cover the vents of the projector as this may lead to excessive heating of
the Falcon 2 components.
• Always leave a minimum distance of 10 cm around the unit to ensure sufficient
ventilation.