AX34509a_e.doc / Aug-10
Page 29 / 38
7.
Commissioning
Commissioning of this unit is easy and uncomplicated when following the subsequent steps:
Step
Action
See section
1 Analogue
inputs
•
Set jumpers
3
2 Basic
settings
•
Select Operation mode
6.1
•
Keep linearization and Tare function off firstly 6.1
•
Configuration of the analogue inputs, scaling
of the display
•
Select combination and final scaling
(if applicable)
6.3.1 and 6.3.2
6.3.3
•
Configuration of switching outputs (AX 347)
(if applicable)
6.4
3 Parameter
settings
•
Configuration of the serial interface
6.5
4 Supplementary
functions
•
Set Tare function and Linearization
(if applicable)
8
A Set-Up Form is available in the appendix of this manual, which may be used for a most
convenient and clearly arranged setup procedure.
It is advisable to do settings for Tare and linearization functions quite at the end, after all other
functions have already proved to work fine.
