Aux plug
Connect one end of the 3.5 mm Jack stereo plug to the 3.5 mm Jack stereo plug of your audio device
such as smartphone, mobile phone, computer, and the other end of the 3.5 mm Jack stereo plug to
Aux plug of the
BT058
speaker. You have to connect to audio output in green plug of your computer.
You have to adjust the volume of your audio device to set the volume. LED indicator blinks in blue
when you are using the speaker in Jack stereo mode.
Press
button one time to play or pause music.
Keep pushing button of the speaker to – to decrease the volume.
Keep pushing button of the speaker to + to increase the volume.
Battery and Charging Notice
•
The speaker has built-in rechargeable battery. A normal charging process takes about 2
hours. LED will turn on in red when charging and will turn off when charging is finished. You
can continue to use the speaker during the charge. Use the delivered USB cable to connect
one end to the speaker (micro USB plug) and the other end to USB computer plug
•
Please make sure the battery has been fully charged and fully released at the beginning of
first use to ensure the battery the best performance
•
Always use delivered USB power cable to charge the speaker. Using any incorrect power
supply cable can cause damage and void the warranty
•
After finished charging, please pull out the cable from the speaker and from the computer
•
Do not put the speaker in charging state for a long time. This will shorten the lifetime of the
battery
Trouble shooting
If disconnection occurs, please check the following factors:
•
Ensure that the speaker has enough power, is turned on and has been successfully paired
to your Bluetooth peripheral
•
Bluetooth function of Bluetooth peripheral is enabled
•
Bluetooth peripheral must support A2DP and AVRCP standard
If you have no sound with your Android device, check that you have enable Audio in device settings.
If your computer has not HSP, A2DP or Bluetooth 4.0 function, speaker will not be compliant in
wireless mode, but it can be used by using 3.5mm Jack stereo wire (not included).
In your computer system, check that you have checked the speaker case as shown below :
This speaker is not compliant with Windows 8 phone because this system has not yet bluetooth driver.
You may not set up the volume with some Bluetooth device such as SONY VITA.
This product is in compliance with the essential requirements of the European Directives for which it is
concerned. You can download declaration of conformity on the website : http://www.espacepc.com
Copyright © 2014 All rights reserved
