In the interest of the safe and proper use of this product, please read these instructions
carefully and retain them for future reference.
UK importer: Festive Lights Ltd, Preston Road, Charnock Richard, Chorley, Lancashire, PR7 5HH
EU importer: Festive Lights BV, Utrechtseweg 341, 3818 EL Amersfoort, Netherlands
festive-lights.com
Made in China Fabriqué en Chine Hergestellt in China
General
1.
This product is only for use with products in out ConnectGo 31V connectable range.
2.
All
products in this range come with weatherproof, 2 pin connectors, which will connect
seamlessly with all items in the 31V system range.
3.
Check your power rating label for
maximum LED quantity and power consumption of this product. Do not exceed this
maximum.
4.
Products in this 31V range are manufactured to IP44 standards allowing for
indoor and seasonal outdoor use.
Before you start
1.
Always connect the power source indoors/in a suitable weatherproof enclosure to ensure a
safe connection.
2.
Avoid using sharp-edged tools or mounting accessories (e.g. metal wires)
to hang or fasten any part of your system.
3.
This product MUST NOT BE MODIFIED; if any
modification is made i.e. cutting, extending lead wires, or using a different transformer than
supplied, the warranty will be invalidated and may render the product unsafe.
4.
The LED
bulbs used are designed for long life and are non-replaceable. Do not attempt to repair or
replace them.
About the products
Our 31V transformers boasts 8 different functions including: Combination, In Waves,
Sequential, Slow-Glow, Flash, Slow Fade, Twinkling, and Steady On. Each time you switch the
lights on, the built-in memory chip will automatically select the last function used. Please note:
the plug must be indoors, or in a suitable weatherproof enclosure. The 5m lead cable can be
used outdoors.
Note for CG025:
only 1,000 LEDs/5 SETS can be run from a single port at any one time. So if
your display contains more than 1,000/5 SETS, then simply use the other ports to continue your
display.
Instructions to activate timer using the controller on the plug
1.
Press the button to cycle through the different functions, you can still cycle through the
functions whilst in timer mode.
2.
Press and hold for 3 seconds and the button will turn green,
indicating the 6 hours timer is on (6 hours on and 18 hours off).
3.
Press and hold for 3 seconds
again and the button will turn red, indicating the 8 hour timer is on (8 hours on and 16 hours
off).
4.
Press and hold for 3 seconds again and the light will turn off, indicating the timer is off.
5.
The small transformer (CG052) is also supplied with a remote control which contains its own
instruction manual.
2
2.
Connect to the female connection (2hole) on the
transformer lead cable, ensuring correct polarity.
Check the rubber ‘o’ ring is secure and tighten the
screw cap over the connection.
1.
Remove the end cap from the desired Connect-
Go light string or accessory.
1
IP44
600 LEDs
1,600 LEDs
4,000 LEDs
(1,000 from each port)
CG025B
CG052
CG008
Large Transformer, BS Plug
PRODUCT CODE PRODUCT NAME
Small Transformer, BS Plug
Medium Transformer, BS Plug
TIMER
MAX. LED LOAD
(string lights)
MAX NO. SET
(festoon Lights)
3 SETS
11 SETS
20 SETS
(5 sets from each port)
6 & 8 hour
6 & 8 hour
Fixing / Storage / Contact
Résoudre les problèmes / Rangement / Le Contact
Einbau / Aufbewahrung / Kontakt
Bei technischen Fragen zu diesem Produkt wenden Sie sich bitte an Festive Lights Ltd,
[email protected] (in englischer/deutscher Sprache). Wir antworten innerhalb von 2 Werktagen (in
englischer/deutscher Sprache). Alternativ können Sie uns montags bis freitags
auch telefonisch unter +44 1257 792111 von 10:00 Uhr – 18:00 Uhr (deutsche Zeit) erreichen
(in englischer Sprache).
Pour toute information technique concernant ce produit, veuillez contacter Festive Lights Ltd sur
[email protected]. Nous vous répondrons sous un délai de 2 jours ouvrés. Vous pouvez aussi nous
téléphoner au +44 (0)1257 792111. Service disponible entre 9h00 et 17h00 du Lundi au Vendredi.
1.
Before fixing, it is recommended that you test all products and check all connections are secure.
2.
Before
connecting to an electricity supply, check that no wires are damaged and water seals (rubber “o” rings) are in
place.
3.
Make sure you connect the power supply to a regular 240V socket, but do not switch on until all
connections are complete.
4.
Carefully position cables to avoid a ‘tripping’ hazard and away from sources of
direct heat.
1.
Note: the lifespan of this system is subject to the way in which it is handled. Make sure it is handled
carefully during assembly, dismantling and storage.
2.
Dry thoroughly before storage, as damp can shorten
the life.
For any technical information relating to this product, please email Festive Lights Ltd on
[email protected]. We aim to respond within 2 working days. Alternatively, contact our help line on
(01257) 792111. This service is available between 9.00am – 5.00pm Monday to Friday.
1.
Avant de tenter une réparation, nous vous recommendons de tester toutes les lumières ensemble ainsi
que les différentes connexions.
2.
Avant de connecter le produit à une source d’éléctricité, veillez à ce que les
câbles ne soient pas endommagés et que les joints imperméables (en forme de ‘O’ en caoutchouc) soient en
place.
3.
Veillez à connecter la prise à une prise électrique 240v – ne connectez pas le produit sur le courant
avant de vous être assuré que toutes les connexions soient prêtes.
4.
Afin d’éviter tout risque de chute ou de
trébuchement, veuillez placer les câbles dans un endroit sûr et les tenir éloignés de toute source directe de
chaleur.
1.
Noter que la durée de vie de votre installation et vos produits dépend aussi de la façon dont vous en
prendrez soin. Manipuler avec délicatesse pendant le montage et le démontage ainsi que le rangement.
2.
Essuyer parfaitement avant rangement car l’humidité pourrait raccourcir la durée de vie de votre produit.
1.
Vor festen Einbau empfehlen wir, daß Sie sämtliche Lichter testen und prüfen, daß alle Steckverbindungen
sicher miteinander verbunden sind.
2.
Vor Stromanschluß prüfen Sie, daß die Verkabelung keine Beschädi-
gungen aufweist und die Wasserdichtungen (O-förmige Gummiringe) richtig positioniert sind.
3.
Stellen Sie
sicher, daß Sie den Stecker erst nachdem alle Steckverbindungen richtig miteinander verbunden sind, an
eine haushaltsübliche 240V Steckdose anschließen.
4.
Verlegen Sie die Kabel nicht in der Nähe von
irgendwelchen, direkten Wärmequellen und so, daß Stolperfallen vermieden werden.
1.
Bitte beachten Sie: Die Lebensdauer dieses Systems ist abhängig von der Art der Behandlung. Bitte achten
Sie darauf, es vorsichtig zu befestigen, abzubauen und zu lagern.
2.
Lassen Sie es gründlich trocknen, bevor
Sie das Produkt lagern, da Nässe die Lebensdauer des Produktes deutlich verkürzen kann.
6 & 8 hour
