16
2
Select “
Obtain an IP address from DHCP server
”. If there is a DHCP server on your
network. This option allows the print server to obtain IP-related settings automatically
from your DHCP server. This setting, by default, is disabled. If you would like to manually
specify an IP address to the device, please skip to the following step.
3 In
the
IP Address
option, type an IP address for the print server. The IP address must
meet the IP addressing requirements of the network segment.
4
(Optional)
In the
Subnet Mask
option, type the Subnet Mask your LAN or network
segment is currently configured to use.
5
(Optional)
In the
Gateway
field, type the IP address of gateway.
6 When done, click
OK
button. The program will save the above settings into the print
server.
7 Done
Summary of Contents for PAN1000W
Page 14: ...14 12 Done ...
Page 59: ...59 f Click New button g Click Forward button ...
Page 65: ...65 5 Click Upgrade 6 Done ...
