Installation Manual
Connect
2
Car Anywhere GSM Kit
www.connect
2
car.com
21
11.5.
Red
/White Wire (Pin9) REMOTE START/STOP ACTIVATION output:
This wire (red/white) is the remote start/stop activation wire.
Connection:
The pin-12 (red/white) terminal should be connected to the “start activation” terminal of an already
installed and working remote start device. Through this terminal, the device can remotely start or stop the
engine when it receives a remote start command from the phone interface. Please refer to the user manual
for detailed explanation of how to start or stop the engine remotely.
The remote start feature works in conjunction with the Tachometer wire (
Orange wire
Pin 2) to
determine if the vehicle is running or not. So if the Tach wire is not connected, this remote start trigger
feature will not work.
Hint:
You can contact us
for a list of known remote starters
compatible with this feature.
Some compatible alarms/remote starters are Viper, CompuStar, and Omega.
11.6.
Yellow/White Wire (Pin7) Arm/Lock output (-100ma):
This wire (yellow/white) is the Arm/Central Lock wire.
Connection:
The pin-7 (yellow/white) terminal should be connected to the “Lock/Arm input” terminal of a factory door
lock input or can also be connected to the lock/arm trigger of an already installed and working aftermarket
alarm device. Through this terminal, the device arms/locks the already installed security. This terminal
should be left open if not used. This will send a short negative pulse to the factory alarm/aftermarket
alarm.
Hint:
Refer to the Factory/aftermarket Security Alarm Installation manual to find the
lock/arm trigger wire.
11.7.
Brown
/White Wire (Pin5) Disarm/Unlock output (-100ma):
This wire (brown/white) is the Disarm/Central Unlock Wire.
Connection:
The pin-5 (brown/white) terminal should be connected to the “Disarm input” terminal (Brown for Omega
Alarm) of the already installed and working security and remote start device. Through this terminal, the
device disarms the already installed security system by activating the central unlock system of the vehicle.
Hint:
Refer to the Factory/aftermarket Security Alarm Installation manual to find the
unlock/disarm trigger wire.
