Connect, Inc.
Configuration
February 1998
3-7
Windowing keys are available to change the display to different areas
of the screen.
HARD
—Setting the Quadrants option to
hard
, is similar to
soft
, except that
the windowing keys are not available to change the display.
LOCK
—When
lock
is selected, the display is locked into showing a certain
area of the screen, which is specified with row and column
coordinates. These positional coordinates define the upper left-hand
corner of the display. Windowing keys are not available with this
option. The
Lock
Row
and
Lock Column
fields for lock coordinates
are found on the second page of this form. With Quadrants set to
lock
and the
Lock Row
set to
6
and
Lock Column
set to
20
, Figure 3-5
shows the portion of the host screen displayed on the terminal screen.
Lock Row
[Text Field] Applies only when quadrants is set to
lock
. Enter the
row number of the host screen where the terminal display begins. The
limits are 0 to 23. The default is zero (0).
Lock Column
[Text Field] Applies only when quadrants is set to
lock
. Enter
the column number of the Host screen where the terminal display
begins. The limits are 0 to 79. The default is zero (0).
0,0
23,0
Host Screen
6,20
23,79
0,79
RF Screen
Figure 3-7 Host Screen Coordinates With RF Screen
Scroll mode
[Toggle Field] The selections are full and half. Screen scrolling
for up, down, left and right is controlled by this option. When
full
is
selected for an 8 by 20 screen, the screen scrolls up/down 8 rows. If
half
is selected, it scrolls up/down 4 rows. For left/right,
full
scrolls
20 columns and
half
scrolls 10. The default is
full.
