COM Express Type 10 PC Connector Carrier Manual
Users Guide
Document: CTIM-00489
Revision: 0.01
Page 7 of 38
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2019-07-04
Introduction
Connect Tech’s
COM Express® Type 10 PC Connector Carrier
is an extremely small carrier board featuring a
combination of PC style connectors and locking pin header connectors. The carrier has a robust offering, with 2x
USB 3.0 Type A ports, 2x USB 2.0 Type A ports, 1x HDMI, 1x LVDS interface, and 2x GbE.
The COM Express Type 10 PC Connector Carrier Board provides support for the latest generation of low-powered
CPUs. It is ideal for space constrained applications and supports extended temperature ranges of -40°C to +85°C.
Product Features and Specifications
Specifications
Compatibility
COM Express
®
Type 10 Mini Modules
PICMG COM Express® COM.0 R2.1
Mini PCIe Expansion
2 x half size cards OR 1 x full length card
Both sockets have PCIe and USB signaling, one socket also can be
configured as mSATA.
Storage
1 x mSATA
USB
2 x USB 3.0 Ports (Only if supported by COM Express Module)
6 x USB 2.0 Ports (2 to USB 3.0 connector, 2 to USB 2.0 connector, 2 to
miniPCIe)
Network
2 x Gigabit Ethernet (10/10/1000) Ports:
1 from COM Express
1 from on-board Intel 82574I PHY/Controller
GPIO
8-bit GPIO
Display
1 x HDMI
1 x LVDS
Audio
HD Audio (Cirrus Logic CS4207 codec)
1 x stereo input
1 x stereo output
Serial
2 x RS-232/422/485 hardware selectable ports
Misc External Interfaces
SMBus
I2C
Battery Low Indication
System Status (S3 and Reset Outputs)
Power
Single wide input range
+8V to +14V DC (may be module dependent)
RTC Battery
No on-board RTC battery
Option to connect external RTC battery.
Connectors
USB Type A, RJ45, HDMI connectors, additional signals via shrouded
locking ruggedized 2mm pitch headers. Can be mated to CTI custom
cable set to panel mount or PC MIL type connectors
Mechanical Information
84mm x 73.415mm
CCG022:
Weight
68g (carrier only, no module installed)
Operating Temperature
-40°C to +85°C
