Boson for FRAMOS
Users Guide
Document: CTIM-00057
Revision: 0.00
Page 23 of 28
Date: 2021-04-06
Force Recovery Pushbutton
Boson for FRAMOS implements a FORCE RECOVERY pushbutton. This is required for flashing a new
image on to the SoM.
To put into Force Recovery mode, hold down the Force Recovery button and push-release the RESET
button while still holding down the Force Recovery. Now release Force Recovery button.
Function
Description
Location
SW3
Type
Pushbutton
Carrier Power ON – no module
Boson for FRAMOS allows for the platform to have the carrier’s power rails turned ON when no Jetson
NVIDIA module is connected. To enable this, move the DIP switches to the ON position.
Function
Description
Location
SW1
Type
2 position DIP switch