Connect One
II-EVB-363NW User’s Manual
Appendix 4: Installing USB Drivers on a PC
Installing the USB driver:
The USB driver is supplied in three separate files:
sabalo.inf
,
iChip.inf
and
usbser.sys
.
These files may be obtained on the Connect One Web site under:
Support >> Drivers & Utilities at:
http://www.connectone.com/support.asp?did=30
.
1. Copy “sabalo.inf” and “iChip.inf” to the directory C:\WINDOWS\inf. To view the \inf
directory, you must allow viewing of hidden folders in Folder Options.
2. Copy usbser4.sys to C:\WINDOWS\system32\drivers.
3. Connect one end of a USB cable to your PC. Connect the other end to the USB
“device” connector of the II-EVB-363 board on which the
Nano WiReach
is
mounted.
4. Turn on the power to the EVB board.
5. The “Found New Hardware Wizard” of Windows XP pops up and prompts you to
install a new device driver. When prompted with the message “Can Windows connect
to Windows Update to search for software?” Select No, not this time. See Figure 1.
Figure 1
15
