EN
USER MANUAL
BLUETOOTH EARPHONES
CEP-1050-BK
Pairing
1. When turning on the headphones, hold the power button until the diode starts flashing red and blue. Turning on the pairing mode will
also be signalized by voice playing from the headphones.
2. Search for the bluetooth headphones on your device. The headphones will show up under the name
CONNECT IT CEP-1050-BK
.
3. Choose the headphones for pairing. Successful pairing will be signalized by blue flashing diode. If you are prompted for a passkey,
enter
0000
.
4. If the pairing fails or the time for pairing runs out, try to repeat the process.
Note:
When turned off, to recover the connection, turn the headphones on. Make sure that the bluetooth is enabled on your device.
Answering phone call
Press the power button. Incoming call will be signalized by ringtone and by voice.
Rejecting phone call
Press the power button 2 times.
Hanging up phone call
Press the power button.
Re-dialing
Press the power button twice in standby mode.
Music playback
Press the power button in standby mode.
Next or previous track
Hold the
+
button or the
-
button to change the sound track.
Volume control
Press the
+
button or the
-
button to change the volume.
Note:
The support of functions mentioned in this manual depends on the device the headphones are paired with.
3
Warning
The use of this product reduces your perception of surrounding sounds. While using the earphones, please, do not control any vehicle
or machine. Clean the device with soft wet cloth, which does not become fuzzy. When cleaning, do not use aggressive cleaners.
To prevent possible hearing damage, do not listen at high volume levels for long periods.