Conmec CRP30-1, Operator'S Manual

Page: 10 / 16

10
2. OPERATION
2.1 Start Preparation
Before starting the engine, check the following:

Fuel level – the tank should be at least half full.

Motor oil level.

Air filter.

Fuel lines for leaks.

External screw connections for tightness.
2.2 To Start
2.2.1 Starting the petrol engine

Open the fuel tap (a1).

Cold start: Close the choke (d2).
Warm start: Open the choke (d1).
Note: The engine is hand warm or hotter with warm start.

Set the engine switch to "ON" (b2).

Push the throttle lever to the left (c2).

Pull out the starter rope (e) until compression resistance can be felt and then let it roll back in
again.

Pull the starter rope with force, but not suddenly.
The engine starts.

Let starter rope slowly roll back in.

Open the choke while the engine is warming up.

Open the throttle lever completely for operation (c1).