
7
ELECTRICAL CONNECTION
*The device must be connected to the main electricity grid only by authorized electricity
technicians in accordance with the laws and regulations in force.
*Make sure that the power from the main grid is enough to supply the power stated in the
information tag placed on the front bottom of the device.
*If the current of fuse in your house is less than 16 Ampere, have a qualified electrician
connect a 16 Ampere fuse.
WARNING: The device must absolutely be grounded.
*Your oven includes a grounded plug mounted on the grid cord. This plug must be used
with a grounded line. Have a licensed electrician do the grounding installation.
Before supplying electricity to the device:
1) Place the oven in a way to make reaching the plug used for electricity connection or
double pole switch easier.
2) Do not let the electricity cable touch hot surfaces when placed and do not pin it to the
oven lid.
3) Contact the nearest authorized service if the electricity cable is damaged. Make sure
authorized service makes the chance with a new cable with plastic insulation at the same
size and that can withstand the electricity current the oven needs.
*A double pole switch with at least 3 mm between the contact points between the device
and the electric wire and suitable for carrying the desired load in accordance with the laws
in force must be installed.
if the device is to be connected directly to the electric wiring. Ground wire must not be cut
be double pole switch.
*It is not advised to use adapters, multi plugs or extension cords. If absolutely necessary,
adapters or extension cords in line with safety laws can be used. However, never go
beyond the maximum current capacity and maximum power stated for the adapter.
*Test heating elements for 3 minutes after the connections are done.
*Electricity safety of the device is guaranteed only if connected to suitable source correctly
with grounding in accordance with the rules. Our company cannot be held responsible for
the damages to people, animals or properties due to the failure to ground the device
properly.
Summary of Contents for CHOB167
Page 1: ...MOD CHOB167...
Page 2: ......