Congo Play MONKEY PLAYSYSTEM FORT, Assembly Instructions Manual

Page: 24 / 32

PHASE 14
A-FRAME and SWING BEAM ATTACHMENT
STEP 1: Gather parts and hardware shown in table 14.
STEP 2: Hammer 05/16" t-nut to a-frame leg
as shown.
STEP 3: Attach a-frame leg to swing beam a-frame
bracket with 05/16"
x
4 1/2" hex bolt
and 05/16" flat washers and finish attaching
a-frame leg with 05/16"
x
3" lag screw and
05/16" flat screw ..
05/16" x 4 1/2" HEX BOLTS
05/16" FLAT WASHERS
05/16" x 3" LAG SCREW
05/16" FLAT WASHERS
TABLE 14 - PARTS AND HARDWARE
II> LETTER l>ESCRIPTION
Al A-FRAME UPRIGHT
000 A-FRAME BRACE
05/16" x 3" LAG SCREWS
05/16" FLAT WASHERS
03/8" x 4" LAG SCREWS
03/8" FLAT WASHERS
03/8" x 6" HEX BOLT
05/16" x 4 1/2" HEX BOLTS
05/16" T - NUTS
STEP 4: Attach a-frame brace to a-frame leg
,,.
with05/16"
x
3" lag screw and
__......,.,.-
05/16" flat washer.
-,,,
STEP 5: Attach swing beam to a-frame bracket with
03/8"x4" lag screw and 03/8" flat washer.
03/8" x 4" LAG SCREW
03/8" FLAT WASHER
STEP 6: Finish attaching swing beam to a-frame
bracket with 03/8"x 6" hex bolt and
03/8" flat washer.
QTY
2
6
10
2
3
4
4