Copyright
©
2016
congatec
AG
ICSLm13.indd
24/95
5.1.2
Power Supply (Internal Connector)
The conga-IC170 offers an internal 4-pin power connector. This connector makes it possible to use customized power supply cables or
connectors. The power input protects against under voltage or over voltage.
Table 13 Connector X49 Pinout Description
Pin Signal
Description
1
GND
Ground
2
GND
Ground
3
+12V - 24V
Power 12V-24V
4
+12V - 24V
Power 12V-24V
Connector Type
X49 : 2x2-pin, 4.2 mm pitch connector
Mating connector: Molex 87427-0442
Note
The conga-IC170 turns on immediately you connect a power supply. To change this behavior, set the “Power Loss Control” in the BIOS Boot
Settings Configuration menu to “Remain OFF”.
5.1.3
Optional SBM
3
Power Connector (Internal Connector)
You can also power the conga-IC170 SBC optionally (BOM option) with an SBM battery kit. This option requires:
•
Connector X47 - SBM battery power connector
•
Connector X46 - SBM battery signals connector
Table 14 Connector X47 Pinout Description
Pin
Function
1
+12 - 24V
2
+12 - 24V
3
GND
4
GND
5
N.C
Internal Power Connector X49
1
2
3
4
SBM3 Power - Connector X47
