Copyright
©
2016
congatec
AG
ICSLm13.indd
23/95
5
Connector Description
5.1
Power Supply
You can power the conga-IC170 SBC with a 12V-24V laptop type DC power supply (on connector X48) or a 4-pin internal power supply (on
connector X49).
Additionally, the SBC offers an optional SBM
3
power connector (only BOM option). When this connector (X47) is populated, you can power the
SBC with it.
Note
The supplied voltages must be within a tolerance of ± 5%
5.1.1
DC Power Jack (Rear I/O)
You can power the conga-IC170 SBC with a laptop-type DC power supply, connected to the DC power jack on the back panel. The power input
protects against polarity reversal and under/over voltage.
Table 12 Connector X48 Pinout Description
Pin
Function
Inner Shell
+12 - 24V
Outer Shell
GND
Connector Type
X48 : DC power jack, 7.4 x 5.1 mm diameter
Note
The conga-IC170 turns on immediately you connect a power supply. To change this behavior, set the “Power Loss Control” in the BIOS Boot
Settings Configuration menu to “Remain OFF”.
DC Plug
1 = + DC (12-24V)
2 = GND
12-24 V maximum
Plug: 7.4 x 5.0 mm
+
-
inner
outer
center
DC Power Jack - Connector X48
