Copyright © 2006 congatec AG
C800m10
5/65
8.5
Device Configuration
Select the ‘Device Configuration’ submenu from the main setup menu and press enter or press the related letter in front of the menu to enter
the ‘Device Configuration’ Setup screen. This menu is used for setting advanced features.
Submenu
Description
A. Drive Configuration
Set configuration for hard drive and flash devices
B. Graphics Configuration
Set the graphic interface configuration
C. Cache Configuration
Set the L1/L2 cache configuration
D. PCI Configuration
Set the PCI Bus configuration
E. I/O Interface Configuration
Set the I/O interface configuration
F. USB Configuration
Set the USB configuration
G. Watchdog Configuration
Set the watchdog configuration
H. Hardware Monitoring
Monitors the system temperature, voltages and the fan speed
I. Boot Screen Configuration
Set the boot screen configuration
8.5.1
Drive Configuration Submenu
Feature
Options
Description
Hard Drive Configuration
No Option
IDE BIOS Support
Enabled
Disabled
Use this option to enable/disable the INT 13h BIOS services for hard drives. If this option is enabled and an IDE controller isn’t
present in the system, there may be an extra delay during POST while the procedures attempt to access a device.
DMA/UDMA Support
Enabled
Disabled
Set to
Enabled
to support DMA/UDMA BIOS support. Set to
Disabled
to force disk drives to use PIO even if DMA-capable.
Force Mode for Drive 1
Auto
PIO0,1,2,3,4
MDMA0, 1, 2
UDMA0, 1, 2
Set to
AUTO
to let the BIOS auto detect the supported DMA mode.
SWDMA = Single Word DMA
MWDMA = Multi Word DMA
UDMA = Ultra DMA
Force Mode for Drive 2
Auto
PIO0,1,2,3,4
MDMA0, 1, 2
UDMA0, 1, 2
Set to
AUTO
to let the BIOS auto detect the supported DMA mode.
SWDMA = Single Word DMA
MWDMA = Multi Word DMA
UDMA = Ultra DMA
CD-ROM Boot Support
Enabled
Disabled
Enables/Disables the CD-ROM boot option. If the CD-ROM boot option is enabled, it will be boot from bootable CD-ROM.
Floppy Boot Support
Enable
Disable
Enables/Disables the Floppy boot option. If the Floppy boot option is enabled, all the floppy boot ROM will be loaded and the floppy
interface services are available.
External HDD Boot
Support
Enabled
Disabled
Enables/Disables the boot option ROM for the second onboard hard disk controller, which drives the second parallel ATA channel and
the two SATA channels.
Note: When set to ‘Enabled’, the system must be rebooted in order for the SATA device to be visible in the Boot Device Priority Menu.
Network Boot Support
Enabled
Disabled
Disable/Enable PXE network boot support to LAN.
Note: When set to ‘Enabled’, the system must be rebooted in order for the Intel Boot Agent device to be visible in the Boot Device Priority
Menu.
