Congatec COM Express conga-TC175 User Manual Download Page 30 | Manualshive

Page: 30 / 71

background image

Copyright

©

2017

congatec

AG

TCKLm10

30/71

5.2.3.1

HDMI

The conga-TC175 offers two HDMI ports on the CD connector via the Digital Display Interfaces. The HDMI interfaces are based on HDMI 1.4
specification with support for 3D, 4Kx2K@24Hz, Deep Color and x.v Color. These interfaces are multiplexed onto the Digital Display Interface
of the COM Express connector.

Supported audio formats are AC-3 Dolby Digital, Dolby Digital Plus, DTS-HD, LPCM, 192 KHz/24 bit, 8 channel, Dolby TrueHD, DTS-HD Master
Audio (Lossless Blu-Ray Disc Audio Format).

Note

The conga-TC175 supports a maximum of two independent HDMI displays. Revisions equipped with optional VGA interface support only one

HDMI interface. See table 2 above for possible display combinations. Consumer electronics control (CEC) is not supported.

5.2.3.2

DVI

The conga-TC175 offers two DVI ports on the CD connector. The DVI interfaces are multiplexed onto the Digital Display Interface of the COM
Express connector.

Note

The conga-TC175 supports a maximum of two independent DVI displays. Revisions equipped with optional VGA interface support only one

DVI interface. See table 2 above for possible display combinations.

5.2.3.3

DisplayPort (DP)

The conga-TC175 offers two DP ports, each capable of supporting data rate of 1.62 GT/s, 2.97 GT/s and 5.4 GT/s on 1, 2 or 4 data lanes. The
DP is multiplexed onto the Digital Display Interface (DDI) of the COM Express connector and can support up to 4096x2304 resolutions at 60Hz.

The DisplayPort specification is a VESA standard aimed at consolidating internal and external connection methods to reduce device complexity,
supporting key cross industry applications, and providing performance scalability to enable the next generation of displays. See section 8.5 of
this document for more information about enabling DisplayPort peripherals.

Note

The conga-TC175 supports a maximum of two independent DisplayPort displays. Revisions equipped with optional VGA interface support

only one DP interface. See table 2 above for possible display combinations.

«
...
28
29
30
31
32
...
»

Summary of Contents for COM Express conga-TC175








































































Reviews:

No comments

Related manuals for COM Express conga-TC175

Brand: Sail Pages: 18

Brand: Gigabyte Pages: 96

Brand: Gigabyte Pages: 36

Brand: Unicorn Computer Pages: 36

Brand: ZiLOG Pages: 42

BOOSTXL-DRV8323Rx

Brand: Texas Instruments Pages: 28

Fatal1ty Professional Z97

Brand: ASROCK Pages: 144

Brand: DFI Pages: 150

Brand: Daewoo Pages: 46

Brand: JETWAY Pages: 51

Brand: TYAN Pages: 35

Brand: TYAN Pages: 58

S2257 THUNDER 2400

Brand: TYAN Pages: 105

Brand: Texas Instruments Pages: 14

Brand: SOYO Pages: 101

Brand: Supero Pages: 104

Brand: Torqeedo Pages: 92

Brand: TOHATSU Pages: 102

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands