Copyright
©
2018
congatec
AG
TEVA2m11
29/56
4.7
Display Interfaces
The conga-TEVAL/COMe 3.0 provides the following display interfaces:
4.7.1
VGA
The conga-TEVAL/COMe 3.0 provides a VGA interface on standard 15-pin DSUB connector X45.
Connector Type
X45: 15-pin, high density DSUB male
4.7.2
DP++
The conga-TEVAL/COMe 3.0 provides three DP++ interfaces on connectors X35, X36 and X37. The DP++ ports on connector X35 (port 0) and
connector X37 (port 3) are routed through a DisplayPort re-driver to support HBR3 data rate (up to 8.1 Gbps).
You can connect a DP++ to HDMI dongle to the DP++ connectors if your module supports it.
Connector Type
X35, X36, X37: Standard DP cable
4.7.3
LVDS/eDP
The conga-TEVAL/COMe 3.0 connects the module’s LVDS/eDP interface to:
•
eDP panel on connector X39
•
LVDS panel on connector X38
Use DIP SW8.1 to select the option for eDP or LVDS panel.
Table 22 SW8.1 - eDP/LVDS Selection
Setting Configuration
ON
eDP selection
OFF
LVDS selection (default)
X45
1
5
15
11
X35, X36, X37
1
2
0N
SW8
