Congatec 050700 User Manual Download

Page: 15 / 72

2022

congatec

GmbH

TSTLm01

15/72

Note

Only variants that feature the Intel RM590E support ECC memory.

See section 7.6 “SoDIMM Population Rules” for a list of memory population rules.

Variants with Intel HM570E chipset do not support Intel VPro/AMT Technology.

Both interfaces are not supported at the same time.

Default on commercial variants; assembly option on industrial variants.

The conga-TS570 does not currently support eSPI interface.

Caution

The conga-TS570 will not boot if the top, upper slot is not populated in a dual memory configuration. See section 7.5 “SoDIMM Population

Rules” for more information.

2.2

Supported Operating Systems

The conga-TS570 supports the following operating systems.

•

Microsoft

Windows

10 (64-bit)

•

Microsoft

Windows

10 IoT Enterprise (64-bit)

•

Linux (64-bit)

•

Yocto

•

Real Time Systems Hypervisor

Note

1. The conga-TS570 supports only native UEFI Operating Systems. Legacy Operating Systems which require CSM (Compatibility Suppport

Module) as part of the UEFI firmware are not supported anymore.

2. For Windows 10 installation, we recommend a minimum storage capacity of 20 GB. congatec will not offer technical support for systems

with less than 20 GB storage space.

Summary of Contents for 050700






































































Search results

Summary of Contents for 050700

Reviews:

Related manuals for 050700

Brands by name

Popular brands

Congatec 050700, User Manual

Search results

Summary of Contents for 050700

Reviews:

Related manuals for 050700

Brands by name

Popular brands