Copyright
©
2021
congatec
GmbH
PA70m01
24/45
5.1.3
USB Type-C
®
Port
The conga-PA7 can be powered via the USB Type-C
®
port (X9).
Connector Type
X9: USB Type-C
®
Port
Note
The USB power adapter must supply 12V and enough current for the intended use case (min. 3 A is recommended). Many USB power
adapters only supply 5V. The conga-PA7 will not power up if the USB power adapter only supplies 5V.
5.2
Cell Battery Header
The conga-PA7 provides a CR2032 cell battery (BR2330A for industrial variants) connected to header X23.
Table 12 X23 Pinout
Pin
Description
1
+3V
2
GND
Connector Type
X23: 2x1 pins, 1.25 mm pitch (Molex 53398-0271); Possible Mating Connector: Molex 51021-0200
Warning
Danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer. Dispose
of used batteries according to the manufacturer’s instructions.
Note
The battery has an adhesive tape on its shrinking tube. This tape enables the system integrator to adequately position the battery in the
system case. The functionality of adhesive tape is time limited if exposed to higher temperatures and harsh or vibrant environment. The
system integrator must ensure a stable position in this case.
X9
Battery
X23
