1. Plug the Vibration trainer into the mains power socket, switch on the red power switch
which located at the back of the machine. The LED will display Program Code for a
second, then the LED will fully display for a second and then beep to indicate that the
panel is in the standby mode. And LED will display “-- -- --”.
2.In standby mode, press the ON/OFF button on the Remote Control or Control Panel,
Machine begin to running, the initial is manual mode(HL), operation time initial for 10
minutes, at Speed 1.
3. Under the running status, press ON/OFF button on the Remote Control or Control
Panel, the machine shutdown, enter into the standby mode.
4.Under the Running Status, by pressing the PROGRAM button on the Control Panel or
pressing M ,P1,P2,P3 buttons on the Remote Control, you can choose different work
mode,P1,P2,P3 are the Auto Mode, M is the Manual Model(HL).
When the work mode changed, the work time is redefined for 10 minutes.
5. Under the Running Status, press the TIME button, by pressing the “+/-” button you
can adjust from 1-15 minutes. In the manual mode, the speed can be adjusted by pressing
the “+/-” button from 1 to 50. In the AUTO Mode, the speed can’t be adjusted.
6.AUTO Mode P1,P2,P3.
6
