28
10.
PREPARE CABLE FOR MICRO DUCT
1. Install optional cable tips onto end of fiber to be installed. (Figure 50)
2. Feed cable through counter rollers and tractor drive belts. Reinstall cable guides.
(Figure 51)
3. Choose the correct cable seals and install on cable. Cone side of cable seal faces
conduit. Place cable seals into venturi grooves, split side down. (Figure 52)
4. Close air block cover. Tighten nuts securely, but do not over-tighten. Use cross
tightening procesure to completely secure. (Figure 53)
Figure 50. Install Cable Tip
Figure 51. Feed Cable through
Rollers
Figure 52. Feed Cable through
Seals and into Conduit
Figure 53. Close Air Block Cover
