25
9.
PREPARE CABLE FOR TRADITIONAL DUCT
The GS 350 is designed so cable may be installed into the machine from the side. Follow
these steps so cable is properly positioned to begin operation.
1. Choose the correct Cable Grip and install on fiber optic cable. (Figure 40)
2. Install 5/8" (16 mm) Swivel on Cable Grip. Grip must be firmly secured to cable.
(Figure 41)
Note: The eye on the grip can be compressed to fit smaller diameter conduits. The eye
of a new grip can be taped with electrical tape in order to make it narrower and travel
more easily through the conduit.
3. Choose the correct Carrier and install on Swivel. (Figure 42)
4. Prepare cable entry guides. (Figure 43)
Figure 40. Install Cable Grip
Figure 41. Install Swivel
Figure 42. Install Carrier
Figure 43. Install Entry Guides
