CONDTROL NEO G200, User Manual

Page: 5 / 27

8 9
user manual
CROSS
LINE LASER
EN
user manual
CROSS
LINE LASER
EN
CONDTROL NEO G200 CONDTROL NEO G200
TECHNICAL SPECIFICATIONS
Working range 50 m
Self-leveling accuracy ±0,3 mm/m
Self-leveling range ± 4,5°
Continuous working time 5 hours
Operating temperature 0°C ... +50°C
Storage temperature -20°C ... +70°C
Tripod mounting thread 5/8’’, 1/4’’
Laser type Class II 532 nm < 1 mW
Power supply 3 х 1.5V LR6 alkaline (AA)
Dimensions 120х75х105mm
Weight 0,5 kg
SET
NEO G200
Laser level NEO G200, magnetic holder, adapter 5/8’’ – 1/4’’, cable tie,
pouch, batteries 3 pcs (AA), user manual.
OPERATION
Before start operation remove the battery cover, insert the batteries,
observing correct polarity. Put battery cover back.
Use alkaline AA batteries only, all batteries should be of the same type
and brand with the same charge level. Replace batteries if battery
charge level indicator turns red while operation.
Place an instrument on a firm and stable surface or a tripod.
Move compensator lock to choose necessary operating mode:
1) Automatic leveling, to build horizontal and vertical planes and
lines:
Move lever lock to unlocked position . Compensator is unlocked.
If the product is out of the range of automatic compensation it will
emit sound signal.
Short press button to turn on necessary laser planes.
Short press button to turn on/off pulse mode that allows
working with laser receiver. In this mode pulse mode indicator will
turn green.
To switch off the product move lever lock to locked position .
1) Locked compensator, to build inclined planes and lines:
Move lever lock to locked position . Compensator is locked. Short
press button to turn on the product. Horizontal plane will
switch on. Locked pendulum indicator turns red.
Short press button to turn on necessary laser planes.