12
13
CONDTROL MicroX
CONDTROL MicroX
12
13
User Manual
CROSS LINE
LASER
User Manual
CROSS LINE
LASER
PRODUCT FEATURES
1 Laser lines apertures
2 On/Off switch button
3 Battery cover
4 Tripod mount 5/8”
5 Transport retainer
6 Mount hole
7 Mount clip
8 Belt mount
Horizontal and vertical leveling
Open the transport restraint and switch on the laser
(button2)
. The laser
cross will appear. Now horizontal and/or vertical leveling work can be done.
The Out-Of-Level function must be activated in order to do horizontal and
vertical leveling. It is activated by releasing the transport restraint. The
Out-Of-Level function signals when the device is set up outside of its 4°
automatic leveling range. If this is the case, the
ON/OFF
button will
illuminate and the lasers will shut off. Place the device on a surface that
is more level.
Slope mode
Lock the transport restraint and switch on the laser (
button 1
). Now slopes
can be laid out.
IMPORTANT:
This mode cannot be used to perform horizontal or vertical
leveling because the laser lines are no longer automatically aligned.
1
2
3
5
4
8
6
7
