manualshive.com logo in svg

Condari QASAIR CON, Installation & User'S Instructions

Share
Download
Condari QASAIR CON Installation & User'S Instructions Download Page 13

Qasair Rangehoods Installation Instructions

13

INSTALLATION INSTRUCTIONS  

 

 

• CON 

 

• NDCH 

 

• LIS

 

• ETN

1.  Loosen screws A and B by turning anti-clockwise.

2.  Turn screw ‘D’ anti-clockwise to extend the outer spring bracket.

3.  Insert rangehood into cut out and turn screw ‘C’ clockwise to align rangehood with cupboard base.

4. 

Do not over tighten.

5.  Tighten screw ‘A’ by turning clockwise to lock fixing bracket.

6. 

Fit off ductwork as required.

7.  To remove rangehood, turn screw ‘D’ clockwise.

Models: 

ETN

 

NDCH

Models: 

LIS

 CON

RANGEHOOD SPRING BRACKETS

MOUNTING POSITION

Installation must be carried out by the procedure outlined.  

Failure to do so may void the guarantee. 

Electrical:

 Wiring to the appliance must comply with State and local Regulations. 

Connection to be carried out by a registered electrician.

Flush Mount ( 1 : 4 )

Proud Mount ( 1 : 4 )

A

A

B

B

Cupboard

Front of Rangehood

FLUSH MOUNT

Cupboard

Front of Rangehood

PROUD MOUNT

12

12

Summary of Contents for QASAIR CON





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands