Condari QASAIR 4F, Installation & User'S Instructions

Page: 23 / 56

Qasair Rangehoods Installation Instructions
23
INSTALLATION INSTRUCTIONS
• TR CT
(REMOTE SWITCHED)
• LIV
(REMOTE SWITCHED)
1. Remove hood from packaging being careful not to touch the stainless steel front.
2. Locate centre of stove and using level or plumb line, mark centre line up to the ceiling.
3. In a new house the hood can be fixed into the ceiling space by bolting or screwing into the ceiling joists or by
building a frame to support the hood.
4. In an existing home, a hole must be cut into the ceiling and pushing the hood into the space. Ensure there are no
obstructions to placing the hood in position. In these cases a ceiling flange in stainless can be supplied to finish
the hood to the ceiling. It is not supplied in colours.
5. The outlets are either top or back ducted and can be changed on site and the hood can be reversed to suit the
intended ducting direction.
6. Once secure in position standard ducting pieces can be used.
7. Switches are not provided and remote switching in a convenient position must be installed. The switching used
must be an electrically approved switch and is not provided by Condari Pty Ltd.
8. The TR CT can be wired with either individual fan control or one pair of switches to control all fans together.
Contact Condari for further information
Installation must be carried out by the procedure outlined.
Failure to do so may void the guarantee.
Electrical:
Wiring to the appliance must comply with State and local Regulations.
Connection to be carried out by a registered electrician.