Condari CONDARY CON 60L, Installation & User'S Instructions

Page: 19 / 44

Qasair Rangehoods Installation Instructions
19
INSTALLATION INSTRUCTIONS
• KEN
• WCV
1. Remove inner side cover panels by removing screws at top of panel, from the inside of the rangehood to allow
access to spring brackets for adjustments.
2. Loosen screws A and B by turning anti-clockwise.
3. Turn screw ‘D’ anti-clockwise to extend the outer spring bracket.
4. Insert rangehood into cut out and turn screw ‘C’ clockwise to align rangehood with cupboard base.
5. Do not over tighten.
6. Tighten screw ‘A’ by turning clockwise to lock fixing bracket.
7. Fit off ductwork as required.
8. To remove rangehood, turn screw ‘D’ clockwise.
Installation must be carried out by the procedure outlined.
Failure to do so may void the guarantee.
Electrical:
Wiring to the appliance must comply with State and local Regulations.
Connection to be carried out by a registered electrician.
Models:
KEN
RANGEHOOD SPRING BRACKETS
MOUNTING POSITION
Flush Mount ( 1 : 4 ) Proud Mount ( 1 : 4 )
A A B B
Cupboard
Front of Rangehood
FLUSH MOUNT
Cupboard
Front of Rangehood
PROUD MOUNT
12
12