58
Maintenance
2583701_C_EN_1812_Nortec-GS_OM
Nortec GS
6.5.3
Cleaning the Secondary Heat-exchanger
Clean the secondary heat-exchanger and the condensate trap (CS/NX model only) as follows. Refer
.
WARNING!
Risk of severe burns from contact with hot surfaces!
Components of the unit can be hot to the touch. Contact with the hot surfaces can result in
severe burns
.
Prevention
:
Allow the unit to cool down to a safe temperature before cleaning the components.
CAUTION!
Risk of damage to the humidifier components!
Do not
use solvents, aromatized or halogenized hydrocarbons, or other harsh chemicals for clean
-
ing.
Disinfectants may only be used if they do not leave behind toxic residue. Rinse all parts thor
-
oughly with clean tap water after cleaning.
Figure 13:
1
2
3
4
5
1
Cleaning Secondary Heat-exchanger - CS/NX Model Only (Nortec GS 100 Shown)
1 Hose, dual fill valve to secondary heat-exchanger
2 Hose, secondary heat-exchanger to fill box via dual fill valve
3 Heat-exchanger, secondary
4 Dual fill valve
5 Trap, condensate
