Condair DA 1400, Installation, Operation And Maintenance Manual

Page: 32 / 58

32 | User Interface
2593630_A_EN_2003_DA_IOM
Condair DA
Here, you can find the runtime (in hours) for the:
l
Dehumidifier
l
Process air fan
l
Reactivation air fan
l
Drive motor
You can also find out the time (in hours) since maintenance of the following components:
l
Process air filter
l
Reactivation air filter
l
Rotor seals
Note: The runtime meters for maintenance (bottom three) can be reset from the Service Level page.
Refer to "Service Level Settings" on page 34 .
7.1.5.2 Alarms
Alarms alert you to any complications with the operation of the unit. While an alarm is active, the alarm status
light on the Main page will display a red or yellow light, depending the urgency. Urgent alarms are shown with red,
and non-urgent alarms are shown with yellow.
Issues causing urgent alarms may cause damage to the unit, so the dehumidifier ceases operation. Non-urgent
alarms do not cease operation of the unit.
The unit may be restarted, however, if the cause for the urgent alarm remains present, the component associated
with the cause will not function.
Ensure that urgent alarms are resolved
.
To remove the alarm (after resolving the issue), the alarm must first be acknowledged . This is done
by accessing the Pending Alarms page and viewing the alarm's details.