background image

4

Introduction

Introduction

1.1 

Notes on this addendum manual

Subject of this addendum manual is the operation of the Control Delta SPA Control Box or the Condair 

Omega via the Modbus or KNX interface.

This addendum manual is intended for use by engineers and properly trained technical personnel. Please 

read this manual thoroughly before installing and configuring the corresponding interfaces.

If you have questions after reading this documentation, please contact your Condair representative. 

They will be glad to assist you.

Symbols used in this manual

CAUTION!

The catchword "CAUTION" used in conjunction with the caution symbol in the circle designates notes 

in this addendum manual that, if neglected, may cause 

damage and/or malfunction of the unit or 

other material assets

WARNING!

The catchword "WARNING" used in conjunction with the general caution symbol designates safety 

and danger notes in this addendum manual that, if neglected, may cause to 

injury to persons

.

DANGER! 

The catchword "DANGER" used in conjunction with the general caution symbol designates safety and 

danger notes in this addendum manual that, if neglected, may lead to 

severe injury or even death 

of persons

.

Safekeeping

Please safeguard this addendum manual in a safe place, where they can be immediately accessed. If 

the equipment changes hands, the documentation must be passed on to the new operator.
If the documentation gets mislaid, please contact your Condair representative.

Language versions

This operation manual is available in various languages. Please contact your Condair representative 

for information.

Summary of Contents for Amazon Echo





































Reviews: