3
USER RESPONSIBILITY
This equipment will perform in conformity with the description thereof
contained in this manual and accompanying labels and/or inserts when
installed, operated, maintained, and repaired in accordance with the
instructions provided. This equipment must be checked periodically.
Defective equipment should not be used. Parts that are broken, missing,
worn, distorted or contaminated, should be replaced immediately. Should
such repair or replacement become necessary, CONCOA recommends
that a telephone or written request for service advice be made to CONCOA
Customer Service in Virginia Beach, Virginia, PHONE: 1-800-225-0473,
FAX: 1-757-422-3125, or E-MAIL: [email protected].
This equipment or any of its parts should not be altered without prior
written approval by CONCOA. The user of this equipment shall have the
sole responsibility for any malfunction that results from improper use,
faulty maintenance, damage, improper repair, or alteration by anyone
other than CONCOA or a service facility designated by CONCOA.
CUSTOMER SERVICE
In the event of equipment failure, call CONCOA Customer Service. Please
be prepared to provide the model number and serial number of the
equipment involved, in addition to some details regarding its application.
GENERAL SAFETY PRACTICES
This regulator is not for use with flammable gases.
Specific procedures for the safe use of this equipment are listed below.
a. The regulator relief valve protects only the regulator and is
not intended to protect any other equipment. Be sure the
equipment with which it is used is also protected by relief
device(s) if such equipment can not withstand full cylinder
pressure.
b. Never use the regulator for gases other than labeled. It is
designed to withstand 3000 psig maximum inlet pressure.
c. All connections to the regulator must be clean. Remove dirt or
other foreign matter from the regulator and metal connecting
parts with a clean lint free cloth. Be sure to use a new gasket
for each installation when a gasket is used.
!
SAFETY
