ENGLISH
10
3.
Set-up the connection RF Channel between the
Mouse and the Receiver
This Conceptronic Laser Mouse is a plug-and-play device.
Normally, it’s not necessary to setup the RF Channel. But if some
interference happens, then you must setup the connection RF
Channel.
Push
2
Push
1
h th
h
l
t b tt
th
P h th
h
l
t b tt
Push the channelreset button on the mouse. Then push the
channel reset button on the receiver. If the cursor does NOT
move after 30 seconds, please follow the steps above.
1
2
GREEN LED FLASH (0.5 sec. Regularly)
GREEN LED FLASH( if any action)
GREEN LED ON
Se arc hing the c ha nnel
Cha nne l c onnec te d
No a c tion
GREEN LED FLASH (0.5 sec. Regularly)
Searching the channel
GREEN LED FLASH (if any action)
Channel connected
GREEN LED ON
No action
