EN
19
VZ1270
CLEANING AND MAINTENANCE
WARNING!
Before cleaning the unit, always disconnect the power cord from the wall outlet!
Prior to handling, make sure the unit has cooled down!
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard objects, as they
may damage the unit’s surface!
Never clean the unit under running water, do not rinse it, and do not submerge it in water!
a) Straightening long hair
Always hold the appliance by the grip and at a sufficient distance from the skin and eyes; use a mirror.
- Divide your hair into approximately 4 cm-wide strands.
- Hold the appliance in your hand according to Fig. 1.
- Starting from the roots, put the prepared strand between the straightening plates (3) for a moment (Fig. 1).
- Clamp the straightening plates (3) of the appliance and pull it slowly from the roots to the tips of the hair (Fig. 2).
Repeat until your hair is straight.
b) Straightening short hair
The process is the same as for long hair, but instead of pulling the appliance along the hair, only press the strands
between the straightening plates for approximately 10 seconds.
7. When the hair treatment is finished, let your hair cool and then brush it.
8. Switch the appliance off after use with the switch (1). The operation indicator (2) will go out.
9. If you need to put the appliance aside during use, always switch it off and put it on a fireproof surface.
10. When using the appliance in a bathroom, make sure you switch it off immediately after use, and disconnect it
from the wall outlet, as the proximity of water and any contact of the appliance with water are very dangerous,
even if the appliance is switched off!
11. The protective sleeve (5) should be used for locking the clasped straightening plates for storing and for
protecting them during transport!
WARNING! Pull the protective sleeve on when the straightening plates are cold.
Fig. 1
Fig. 2