51
VTE7014
EN
Observe the following instructions when commissioning the wine cooler with a thermoelectric
cooling system:
1. an air supply of at least 200 cm³ should be left for ventilation
2. the distance between the wall and the side of the wine cooler should be at least 20 mm
3. a gap for air flow of at least 50 mm should be left under the wine cooler
4. the air flowing into the ventilation openings must not be preheated
5. the entire cooling system should be properly ventilated
Connection to the mains
•
Only use grounded sockets.
•
Do not use multiple sockets, plugs and extension cords. There is a risk of overheating.
•
The plug of the power cord on the appliance must be freely accessible even after the installation.
•
Changes in a connection may only be performed by a qualified professional.
•
Electrical safety of the appliance can be guaranteed only if the protective terminal of the appliance is connected to
the protective conductor of the mains.
•
The manufacturer bears no responsibility for damage to persons or property as a result of missing or bad protective
connection.
•
The power cord must be positioned in a way that it is not deformed or excessively bent.
APPLIANCE DIMENSIONS
273
550
845
