![Concept2 VTE7014 User Manual Download Page 50](http://html.mh-extra.com/html/concept2/vte7014/vte7014_user-manual_2650110050.webp)
50
VTE7014
EN
TEMPERATURE CONTROL
1. The wine cooler is equipped with an “automatic” lock of the control panel, which is activated 20 seconds
after the last pressing of the button.
2. Press and hold the button
for 2 seconds to unlock the control panel. You will hear a sound signal
indicating that the control is now active.
3. Press the button
or
on the control panel to set the required temperature.
4. The temperature that you wish to set increases by 1 °C if you press the button
.Conversely, the
temperature decreases by 1 °C if you press the button
once.
Setting of temperature units
1. Press and hold the button
for at least 2 seconds.
2. The display shows the Fahrenheit or Celsius unit indicator along with the temperature indicator.
3. Repeat the steps described above until the display shows the data with your preferred temperature units.
Inner light
1. You can turn the inner light on and off by pressing the button marked with the symbol
once..
2. If it stays on for 10 minutes, the light will turn off automatically. Press the button marked with the symbol
again and the light will turn on again.
CLEANING AND MAINTENANCE
•
Disconnect the power cord from the wall outlet or switch off the circuit breaker of the appliance before cleaning
and maintenance.
•
For cleaning, we recommend using non-aggressive products, preferably clear lukewarm water along with a soft
sponge or paper towel.
•
Let the appliance open to dry out naturally after cleaning.
•
For cleaning, we do not recommend cleaning agents such as alcohol, acetone, oil, toothpaste or any other abrasive
products.
•
We do not recommend using coarse sponges or steel brushes.
•
We do not recommend using boiling water as it may cause damage to individual parts of the appliance.
•
We do not recommend cleaning the appliance with a stream of water that could interfere with the insulation or
cause a short circuit of some electronic components of the appliance.
•
Clean all the accessories of the appliance with a solution of lukewarm water and a detergent. Never wash the
accessories in a dishwasher!
Installation instructions
• The warranty does not cover damages caused by incorrect installation.
•
The responsibility for installing the appliance lies with the buyer, not the manufacturer.
•
The manufacturer bears no responsibility for damage caused to people, animals or property due to incorrect
installation.
•
Place the appliance on a flat place in a well-ventilated are.