EN
20
SERVICING
Any extensive maintenance or repair that requires access to the inner parts of the product must be performed by an
expert service centre.
ENVIRONMENTAL PROTECTION
• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags shall be handed over for recycling.
Appliance recycling at the end of its service life:
A symbol on the product or its packaging indicates that this product should not go into household waste.
It must be taken to the collection point of an electric and electronic equipment recycling facility. By making
sure this product is disposed of properly, you will help prevent the negative effects on the environment and
human health that would otherwise result from inappropriate disposal of this product. You can learn more
about recycling this product from your local authorities, a household waste disposal service or in the shop
where you bought this product.
PK9010, 9020, 9030
WARNING!
Do not use sharp metal objects on the grilling plate and do not cut anything on it. The non-stick surface can be
scratched and damaged. Use wooden or heat-resistant kitchenware.
NOTE!
After several uses, the shape of the heating element may be burnt into the appliance and the ceramic coating may
become slightly tinted. This is perfectly normal and does not indicate a fault.
CLEANING AND MAINTENANCE
Clean the unit after each use to prevent the accumulation of grease, burned-on remnants of food, and unpleasant smells.
Turn the unit off, unplug the power cord from the wall outlet, and let the unit cool before cleaning and after use.
Do not immerse the power cord, plug, or appliance into water or any other liquid.
Clean the surface with a wet cloth.
Do not use steel wool, abrasive agents or solvents to clean the unit.
Clean the surface with a wooden scraper or other kitchen tool that will not scratch the non-stick surface.
Wipe the removable control module with a damp cloth or absorbent paper. Do not immerse this part into water or any
other liquid. Clean the part on a dry surface so that the part cannot accidentally fall and become damaged.
Let all the parts dry before assembling the accessories.
