EN
EN
124
125
IL3000
IL3000
Telogen phases are resting periods. The hair growth cycle lasts approximately
18-24 months.
Most hair follicles are in one of the two resting phases. The IPL technology is
efficient only when the hair is in the growth phase. All hairs are never in the
growth phase at the same time. It is therefore necessary to understand the
growth cycle of follicles in order to permanently remove hair.
Three phases - the Anagen phase, the Catagen phase and the Telogen
phase
The IPL epilator offers safe and long-lasting har removal in the privacy and
comfort of your home.
It removes unwanted hair from the skin, especially from the skin of the legs and
hands, as well as from sensitive areas such as the armpits, bikini line and face
(cheeks, upper lip, chin).
The appliance can be used by both men and women over 18 years of age.
If you are not sure if you can use the epilator, please consult your dermatologist
or general practitioner.
PREPARING THE SKIN
•
Before using the appliance, the skin must be shaved, clean, dry and free of
any residues of deodorants or any other cosmetic products.
•
Do not remove hair with an electric epilator or wax before using the IPL
epilator. The epilation (removal of hairs with roots) causes the IPL epilator
hair removal to be ineffective.
•
Do not expose your skin to sunlight 4 weeks before using the epilator and
2 weeks after its use. Clothing that adequately covers the skin or a sunscreen
(with a minimum protection factor of 50) protects you against the sunlight.
We recommend using sunscreen products regularly for 3 weeks before and
after the treatment.
•
If you applied self-tanning lotion to your skin, do not use the epilator until
the tanning effect of the lotion has completely disappeared.
•
Always cover tattoos, birthmarks or dark marks, such as freckles, nevi, warts
or tumours, before using the device.
•
Never use the appliance on nipples or genitals (male or female).
•
Never use the appliance on any parts of your body where you might later
want hair.
•
Never use the appliance for any purpose other than hair removal.
•
Always make sure that you aim the appliance at the treated area of the skin
and that it is touching it fully before releasing the pulse.
SETTING OF THE IPL EPILATOR
1. Remove the appliance and all its accessories from the box.
2. Plug in the power adapter cable.
3. Plug in the adapter.
4. Press the On/Off button to turn the appliance on. The Ready indicator and
Level 1 indicator light up. You will hear a faint fan noise.
5. The appliance is ready for use.
6. Select the intensity according to your skin type. Use the On/Off button to
select the desired intensity. For example, to go from level 1 to level 4, press
the On/Off button repeatedly until you reach the desired intensity. The
appliance gradually increases the intensity level from 4 to 5, then back from
level 5 to levels 4, 3, 2 and 1.
7. Press the application surface of the appliance against your skin. Once the
appliance is in direct contact with the skin, the Ready indicator flashes.
8. The appliance is equipped with a mechanism that protects the eyes
during use. The contact sensor prevents the pulse from being released,
until the application surface of the appliance is in full contact with the
skin. Therefore, always make sure that the application surface is correctly
applied to the skin.
9. Pulse release button - by pressing this button the appliance emits a pulse of
light and you may feel a slight sensation of heat or tingling.
10. Remove the epilator from the treated area of the skin.
11. Move the application surface to the next area of the skin you wish to treat.
The pressure marks left on the skin after using the epilator will help you to
Growing phase -
Anagen
Transition phase -
Catagen
Resting phase -
Telogen
