81
EN
PDV7575bc
Electrical connection
y
Verify that the connected voltage and current protection correspond to the data on the nameplate.
y
Only use electrical sockets with earthing.
y
Do not use splitter sockets, connectors or extension cords.
y
The plug of the power cord must be freely accessible even after its installation.
y
Changes to the connection my only be made by a qualified professional.
y
The electrical safety of the appliance can only be guaranteed if the protective terminal of the appliance is
connected to the protective conductor of the power distribution network.
y
The manufacturer is not responsible for damage to persons or objects due to missing or incorrect
protective connection.
y
The power cord must be positioned so that it does not come into contact with the hot parts of the
appliance and is not deformed or excessively bent.
y
If the appliance is connected to a terminal block or to a distribution box, observe the colour coding or
description of individual conductors.
Gas connection
y
Connection of the appliance may only be performed by a qualified professional!
y
This appliance must be installed and connected in accordance with the provisions of CSN 38 6441 and CSN
38 6460.
y
When using propane-butane (LPG) or propane-butane in cylinders, the provisions of CSN 38 6460 must be
observed.
y
Verify that the connected gas inlet corresponds to the data on the nameplate.
y
This appliance is designed to run on LPG or natural gas (NG). Adjustment for use on LPG and natural gas
(NG) may only be performed by a qualified professional.
y
If the appliance is connected to natural gas (NG), use a threaded pairing adapter GJ 1/2” (see Fig. 5).
y
If the appliance is connected to LPG, use the plug-in pairing adapter (see Fig. 6).
y
The gas inlet must be positioned so that it does not come into contact with the hot parts of the appliance
and is not deformed or bent.
y
If there is an oven located under the gas hob, place the inlet pipe or gas hose so that it does not come into
contact with the oven surface.
The gas rail
Fig. 5
Fig. 6
The gas rail
Seal
Seal
Threaded pairing
adapter GJ 1/2“
Slip-on pairing
adapter
