46
PDV 4360, 4375
EN
Cleaning
Clean the appliance after every use. Food residue may be burned or ignite during the next use! Clean the warm
base using a paper towel and warm water with detergent. Then wipe the base with a damp cloth and dry using a
soft cloth.
Improper
Never use
coarse sponges, abrasive cleaners or caustic agents such as oven cleaner or stain remover.
Control panel
Keep the panel clean and dry.
Food residues and food that has boiled over may affect the performance of the controls.
Burner
If water or liquid that has boiled over enters the burner, allow the burner to cool. Then remove the grate, burner
cap and flame diffuser (Fig. 2) and clean all the parts. You can dip them in warm water with detergent and use a
fine brush to clean them. Dry every part well before installation.
UNIT INSTALLATION
• Only the customer is responsible for installation in situ. Defects caused by incorrect installation are not covered
by the warranty.
• The manufacturer bears no responsibility for damage caused to people, animals or objects as a result of incorrect
installation.
• Install the appliance in a properly ventilated room only! Refer to the dimensions indicated in Fig. 5.
Fig. 5
